MOS FET Relay - China

领导市场 Leading the market with substantial space saving offered in our SSOP and new USOP package size.

标准使用电流是2-15mA Standard driving current is 2-15mA. Ultrasensitive type with driving current 0.2mA(max.) available.

Realize the structure without contacts by sending light signal. Avoid the reduction of life caused by wear of contacts, and realize extended operational life.

Small leakage current

Can withstand external surge current, and not add the snubber circuit. Under normal condition, it is 1 nanometer A or below (GR, LR, PR type), and the leakage current is very small when close.

High insulation

It turns the voltage into the light, and transfers by the light signal, so it is electrical insulation. It not only can ensure that the Dielectric strength between input and output under normal condition is AC 2500V, but also realizes the serialization of upper 5000V product at the same time, and realize the high insulation.

Excellent shock resistance

All the internal parts use the casting method, and there is not movable part in it, so it has excellent shock resistance and vibration resistance.

High-speed switching

Comparing with the switching time of 3～ 5ms of mechanical relay, its switching time is shortened to 0.2ms(SSOP, USOP). Realize the quick response performance.

Silent

Avoid the switching voice caused by metal contacts of mechanical relay. Realize the function of silence.

Control the micro analog signal correctly

Comparing with the triac, it reduces the dead zone greatly. The input waveform of micro analog signal dose not distort basically and is converted into output waveform without distortion.

Structure and operational principle of MOS FET relays

• (1)LED (light emitting diode)
• (2)Photodiode dome array (PDA)
• (3)MOS FET

• (1)The LED lights when the current is connected at the input side.
• (2)The light sent by the LED will be converted into voltage again when it is received by the photodiode .
• (3)This voltage will be a gate voltage to drive MOS FET via control circuit.

General Purpose

For General Purpose use,
Analog-switching MOS FET Relays with 1a or 2a Contact.

DIP

SOP

Ultrasensitive

Ultrasensitive MOS FET Relays for electric power
saving and various battery-driven devices.
New Models in SOP4-pin package with Driving current 0.2 mA(maximum).
*Driving current=Trigger LED forward current

High Current & Low On-resistance

High Current & Low On-resistance
as same level as the Mechanical Relay

DIP

*( )=C-connection

SOP

*( )=C-connection

S-VSON

Low Output Capacitance and ON Resistance Type (Low CxR)

Ideal for semi-conductor test equipment.
Low C(capacitance between terminals)× R(output on-resistance) type

SOP

SSOP

USOP

Ultra small S-VSON/VSON/USOP/SSOP

The world smallest class*, VSON/S-VSON series available
added to small package SSOP and USOP.
*As of Nobember, 2016

SSOP

USOP

VSON

S-VSON

High voltage
& High dielectric strength

High dielectric strength series
with surge protection between
I/O over 3,750 Vrms(maximum).

*On-resistance when saturated

Current-limiting

Current-limiting Models with 350-V Load Voltage.

b-contact

Analog-switching MOS FET Relays
with 1b(2b) Contact.